MD SysML

MagicDraw/Cameo v19SP3: vs SysPhS-1.1: OpaqueExpression for Slot value exports to Modelica as 'null' if only uses a single variable. WORKAROUND/HACK prefix the variable with '1 *' [FIXED in v2021x]

This page identifies a possible issue, inconsistency, concern, error, or bug!
One of the ways Webel IT Australia helps promote tools, technologies, and languages is by donating a lot of time identifying, tracking, and reporting potential issues, in order to help vendors and developers improve the tools and technologies. In some cases, we also offer workarounds and advice for users. All issues tracked on our public site are offered most constructively and with sincerest gratitude to the tool vendors and technology developers.

MagicDraw/Cameo v19SP3: vs SysPhS-1.1: Modelica export: Direct binding from a PhSVariable value property within a FlowProperty of a Port to an inner value property does not flatten. WORKAROUND: Use an intermediate constraint property.

This page identifies a possible issue, inconsistency, concern, error, or bug!
One of the ways Webel IT Australia helps promote tools, technologies, and languages is by donating a lot of time identifying, tracking, and reporting potential issues, in order to help vendors and developers improve the tools and technologies. In some cases, we also offer workarounds and advice for users. All issues tracked on our public site are offered most constructively and with sincerest gratitude to the tool vendors and technology developers.

MagicDraw/Cameo v19SP3: Does not support display of context-specific values on a FlowProperty symbol within a Port in an IBD

This page identifies a possible issue, inconsistency, concern, error, or bug!
One of the ways Webel IT Australia helps promote tools, technologies, and languages is by donating a lot of time identifying, tracking, and reporting potential issues, in order to help vendors and developers improve the tools and technologies. In some cases, we also offer workarounds and advice for users. All issues tracked on our public site are offered most constructively and with sincerest gratitude to the tool vendors and technology developers.

MagicDraw/Cameo v19SP3+SysPhS-1.1: On export to Modelica sometimes repeats parts of an equation into an extending model.

This page identifies a possible issue, inconsistency, concern, error, or bug!
One of the ways Webel IT Australia helps promote tools, technologies, and languages is by donating a lot of time identifying, tracking, and reporting potential issues, in order to help vendors and developers improve the tools and technologies. In some cases, we also offer workarounds and advice for users. All issues tracked on our public site are offered most constructively and with sincerest gratitude to the tool vendors and technology developers.

MagicDraw/Cameo v19SP3+SysPhS-1.1: Does not cleanly export INLINE Modelica 'if/then/else' statements (a.k.a. "switching" form)

This page identifies a possible issue, inconsistency, concern, error, or bug!
One of the ways Webel IT Australia helps promote tools, technologies, and languages is by donating a lot of time identifying, tracking, and reporting potential issues, in order to help vendors and developers improve the tools and technologies. In some cases, we also offer workarounds and advice for users. All issues tracked on our public site are offered most constructively and with sincerest gratitude to the tool vendors and technology developers.

MagicDraw/Cameo v19SP3+SysPhS-1.1: Does not cleanly export Modelica 'when/then' statements

This page identifies a possible issue, inconsistency, concern, error, or bug!
One of the ways Webel IT Australia helps promote tools, technologies, and languages is by donating a lot of time identifying, tracking, and reporting potential issues, in order to help vendors and developers improve the tools and technologies. In some cases, we also offer workarounds and advice for users. All issues tracked on our public site are offered most constructively and with sincerest gratitude to the tool vendors and technology developers.

SysPhS: MagicDraw/Cameo v19SP3: Export to Modelica does not interpret as 'start' the default on a PhSVariable assigned via ElementValue to a PhSConstant

This page identifies a possible issue, inconsistency, concern, error, or bug!
One of the ways Webel IT Australia helps promote tools, technologies, and languages is by donating a lot of time identifying, tracking, and reporting potential issues, in order to help vendors and developers improve the tools and technologies. In some cases, we also offer workarounds and advice for users. All issues tracked on our public site are offered most constructively and with sincerest gratitude to the tool vendors and technology developers.

MagicDraw/Cameo v19SP3: SysPhS: If you have a custom ValueType it MUST extend Real either directly or indirectly or it will not be seen on export to Modelica.

This page identifies a possible issue, inconsistency, concern, error, or bug!
One of the ways Webel IT Australia helps promote tools, technologies, and languages is by donating a lot of time identifying, tracking, and reporting potential issues, in order to help vendors and developers improve the tools and technologies. In some cases, we also offer workarounds and advice for users. All issues tracked on our public site are offered most constructively and with sincerest gratitude to the tool vendors and technology developers.

Q: What types of simulation, execution, and calculation are available for SysML with MagicDraw/Cameo?

Keywords

There are a number of ways of simulating and executing various aspects of Systems Modeling Language (SysML®), and they are not just novelties! They also really help your models become more robust, logical, and organised.

There is "internal" tool simulation of Activities and StateMachines based on fUML (or variations of it).

MagicDraw/Cameo v19SP3 vs SysML&SysPhS: Export to Modelica: The exported layout annotations appear to be completely broken (at least vs Wolfram SystemModeler) just de-select generation of them on export.

This page identifies a possible issue, inconsistency, concern, error, or bug!
One of the ways Webel IT Australia helps promote tools, technologies, and languages is by donating a lot of time identifying, tracking, and reporting potential issues, in order to help vendors and developers improve the tools and technologies. In some cases, we also offer workarounds and advice for users. All issues tracked on our public site are offered most constructively and with sincerest gratitude to the tool vendors and technology developers.

GOTCHA: MagicDraw SysML/Cameo 19SP3: Export to Modelica: The name of a redefining Property must be exactly the same as the Property it redefines or it will not export properly!

This page identifies a possible issue, inconsistency, concern, error, or bug!
One of the ways Webel IT Australia helps promote tools, technologies, and languages is by donating a lot of time identifying, tracking, and reporting potential issues, in order to help vendors and developers improve the tools and technologies. In some cases, we also offer workarounds and advice for users. All issues tracked on our public site are offered most constructively and with sincerest gratitude to the tool vendors and technology developers.

MagicDraw/Cameo v19SP3 vs SysML&SysPhS: The sample project for the Humidifier example uses DEPRECATED FlowPorts (and sets values directly on them in the StateMachines).

This page identifies a possible issue, inconsistency, concern, error, or bug!
One of the ways Webel IT Australia helps promote tools, technologies, and languages is by donating a lot of time identifying, tracking, and reporting potential issues, in order to help vendors and developers improve the tools and technologies. In some cases, we also offer workarounds and advice for users. All issues tracked on our public site are offered most constructively and with sincerest gratitude to the tool vendors and technology developers.

MagicDraw/Cameo v19SP3 vs SysML&SysPhS: GOTCHA: Will NOT correctly export a SysML-1.6 «~interfaceBlock» to Modelica (but does cope with a tilde ~ prefix in the name of a plain InterfaceBlock)

This page identifies a possible issue, inconsistency, concern, error, or bug!
One of the ways Webel IT Australia helps promote tools, technologies, and languages is by donating a lot of time identifying, tracking, and reporting potential issues, in order to help vendors and developers improve the tools and technologies. In some cases, we also offer workarounds and advice for users. All issues tracked on our public site are offered most constructively and with sincerest gratitude to the tool vendors and technology developers.

MagicDraw/Cameo vs SysML&SysPhS: GOTCHA: Will NOT export a non-normative System «system» block to Modelica, it only recognises a plain Block «block»!

This page identifies a possible issue, inconsistency, concern, error, or bug!
One of the ways Webel IT Australia helps promote tools, technologies, and languages is by donating a lot of time identifying, tracking, and reporting potential issues, in order to help vendors and developers improve the tools and technologies. In some cases, we also offer workarounds and advice for users. All issues tracked on our public site are offered most constructively and with sincerest gratitude to the tool vendors and technology developers.

MagicDraw/Cameo: v19SP3: Property created by dragging onto a Class or Block a symbol of a Classifier named with a single letter capital name 'N' has a poor name 'N:N'

This page identifies a possible issue, inconsistency, concern, error, or bug!
One of the ways Webel IT Australia helps promote tools, technologies, and languages is by donating a lot of time identifying, tracking, and reporting potential issues, in order to help vendors and developers improve the tools and technologies. In some cases, we also offer workarounds and advice for users. All issues tracked on our public site are offered most constructively and with sincerest gratitude to the tool vendors and technology developers.

Annex A.5: Humidifier (with Units)

MDSysML/Cameo 19SP3: SysPhSLibrary vs SysPhS-1.1: RealVectorSignalIn2Element extends RealVectorSignalElement not RealVectorSignalInElement, RealVectorSignalOut2Element extends RealVectorSignalElement not RealVectorSignalOutElement (and so on)

This page identifies a possible issue, inconsistency, concern, error, or bug!
One of the ways Webel IT Australia helps promote tools, technologies, and languages is by donating a lot of time identifying, tracking, and reporting potential issues, in order to help vendors and developers improve the tools and technologies. In some cases, we also offer workarounds and advice for users. All issues tracked on our public site are offered most constructively and with sincerest gratitude to the tool vendors and technology developers.

MDSysML/Cameo 19SP3: Showing stereotype keywords on FlowProperty rows is UNSUPPORTED

This page identifies a possible issue, inconsistency, concern, error, or bug!
One of the ways Webel IT Australia helps promote tools, technologies, and languages is by donating a lot of time identifying, tracking, and reporting potential issues, in order to help vendors and developers improve the tools and technologies. In some cases, we also offer workarounds and advice for users. All issues tracked on our public site are offered most constructively and with sincerest gratitude to the tool vendors and technology developers.

MDSysML/Cameo 19SP3: SysPhSLibrary vs SysPhS-1.1: Continuous.Integrator is missing the 'init' PhSConstant (maps to y_start in Modelica)

This page identifies a possible issue, inconsistency, concern, error, or bug!
One of the ways Webel IT Australia helps promote tools, technologies, and languages is by donating a lot of time identifying, tracking, and reporting potential issues, in order to help vendors and developers improve the tools and technologies. In some cases, we also offer workarounds and advice for users. All issues tracked on our public site are offered most constructively and with sincerest gratitude to the tool vendors and technology developers.

GOTCHA: MagicDraw SysML/Cameo 19SP3: Export to Modelica: 'entry', 'doActivity', or 'exit' Behaviors of a State must be directly owned (not just "wrapped") or they won't be seen on export!

This page identifies a possible issue, inconsistency, concern, error, or bug!
One of the ways Webel IT Australia helps promote tools, technologies, and languages is by donating a lot of time identifying, tracking, and reporting potential issues, in order to help vendors and developers improve the tools and technologies. In some cases, we also offer workarounds and advice for users. All issues tracked on our public site are offered most constructively and with sincerest gratitude to the tool vendors and technology developers.

MagicDraw SysML/Cameo: 19SP3: Does not seem to support export to Modelica from a Package [use a SysML Block as root instead]

This page identifies a possible issue, inconsistency, concern, error, or bug!
One of the ways Webel IT Australia helps promote tools, technologies, and languages is by donating a lot of time identifying, tracking, and reporting potential issues, in order to help vendors and developers improve the tools and technologies. In some cases, we also offer workarounds and advice for users. All issues tracked on our public site are offered most constructively and with sincerest gratitude to the tool vendors and technology developers.

MagicDraw SysML/Cameo: 19SP3: Export to Modelica from TestBed (for SignalProcessor) sample does not validate in Wolfram SystemModeler

This page identifies a possible issue, inconsistency, concern, error, or bug!
One of the ways Webel IT Australia helps promote tools, technologies, and languages is by donating a lot of time identifying, tracking, and reporting potential issues, in order to help vendors and developers improve the tools and technologies. In some cases, we also offer workarounds and advice for users. All issues tracked on our public site are offered most constructively and with sincerest gratitude to the tool vendors and technology developers.

MagicDraw SysML/Cameo: 19SP3: Export to Modelica from SysPhS sample for HumidifierSystem does not execute in Wolfram SystemModeler Simulation Centre

This page identifies a possible issue, inconsistency, concern, error, or bug!
One of the ways Webel IT Australia helps promote tools, technologies, and languages is by donating a lot of time identifying, tracking, and reporting potential issues, in order to help vendors and developers improve the tools and technologies. In some cases, we also offer workarounds and advice for users. All issues tracked on our public site are offered most constructively and with sincerest gratitude to the tool vendors and technology developers.

MagicDraw UML/SysML/Cameo 19SP3: Sometimes on application of a named Association as the Type of a Connector that already has an InformationFlow (or ItemFlow) applied, the direction of the InformationFlow (or ItemFlow) indicator swaps.

This page identifies a possible issue, inconsistency, concern, error, or bug!
One of the ways Webel IT Australia helps promote tools, technologies, and languages is by donating a lot of time identifying, tracking, and reporting potential issues, in order to help vendors and developers improve the tools and technologies. In some cases, we also offer workarounds and advice for users. All issues tracked on our public site are offered most constructively and with sincerest gratitude to the tool vendors and technology developers.

MD SysML and Cameo 19SP3 can't yet validate provided/required Feature subsets (such as Features of one Block against Features of multiple Ports)

This page identifies a possible issue, inconsistency, concern, error, or bug!
One of the ways Webel IT Australia helps promote tools, technologies, and languages is by donating a lot of time identifying, tracking, and reporting potential issues, in order to help vendors and developers improve the tools and technologies. In some cases, we also offer workarounds and advice for users. All issues tracked on our public site are offered most constructively and with sincerest gratitude to the tool vendors and technology developers.