Figure 11-11: Continuous system example 2 {ELIDED PINS}

Gallery
Tutorial
TRAIL: The SysML-1.6 Hybrid SUV sample and specification diagrams in MagicDraw/Cameo (with annotations) [UNDERGOING UPDATE to SysML1.7]
Section
Section: SysML-1.6 specification diagrams: 11 Activities
UML keywords
DecisionNode
Parameter::isStreaming
AcceptEventAction
Signal
SignalEvent
SysML keywords
SysML specification figure
Continuous
«continuous»
Rate
Rate::rate
Slide kind
SysML Activity Diagram
Click on the image to view it full size
Up next
Figure 11-12: Continuous system example 3 {EXPLICIT PINS}
Notes
[ISSUE, TOOL] MagicDraw/Cameo: ERROR: Incorrectly uses 2 ObjectFlow edges and a CentralBufferNode in place of "elided Pin notation" instead of an abstract ObjectNode symbol and 2 arrow symbols (that are supposed to represent together 2 Pins and 1 ObjectFlow edge)
[DISPLAY, ISSUE, TOOL, WARNING] Webel recommends when using MagicDraw/Cameo: AVOID the "elided Pin" abstract ObjectNode notation on Activity Diagrams, use explicit Pins!
Snippets (quotes/extracts)
  [SysML-1.6] The activity diagram for Monitor Traction is shown in Figure 11-11.
  [SysML-1.6] When Monitor Traction is enabled, it begins listening for signals coming in from the wheel and accelerometer, as indicated by the signal receipt symbols on the left, which begin listening automatically when the activity is enabled.
  [SysML-1.6] A traction index is calculated every 10 ms, which is the slower of the two signal rates. The accelerometer signals come in continuously, which means the input to Calculate Traction does not buffer values.
  [SysML-1.6] The result of Calculate Traction is filtered by a decision node for a threshold value and Calculate Modulation Frequency determines the output of the activity.
  [SysML-1.6] SysML provides extensions that might be very loosely grouped under the term “continuous,” but are generally applicable to any sort of distributed flow of information and physical items through a system.
  [SysML-1.6] Discrete and continuous flows are unified under rate of flow, as is traditionally done in mathematical models of continuous change, where the discrete increment of time approaches zero.
  [SysML-1.6] Continuous rate is a special case of rate of flow (see Rate) where the increment of time between items approaches zero. It is intended to represent continuous flows that may correspond to water flowing through a pipe, a time continuous signal, or ...
  [SysML-1.6] Continuous ... It is independent from UML streaming, see clause 11.3.2.8. A streaming parameter may or may not apply to continuous flow, and a continuous flow may or may not apply to streaming parameters.
  [SysML-1.6] Streaming is a characteristic of UML behavior parameters that supports the input and output of items while a behavior is executing, rather than only when the behavior starts and stops. The flow may be continuous or discrete ...
Visit also
Visit also (backlinks)
Related slides (includes other tutorials)
Related slides (backlinks, includes other tutorials)
SysML Activity extension stereotypes - REFERENCE CARD