Icon class icon_class fas fa-quote-left icon_class_computed fas fa-quote-left Related content BDD: Figure 60: Hydraulics blocks, ports, & component properties Source SysPhS-1.1 Copyright information About Object Management Group copyright in text extracts quoted from OMG specifications for educational purposes Snippet kind INFO SysPhS Keywords VolumeFlowElement Keywords SysPhS hydraulics Previous snippet Figure 60 shows block definitions for components of ConnectedTanks in Figure 59. Full quote Tanks and pipes have openings for fluid to pass through, one for tanks and two for pipes. The openings are represented by ports of type VolumeFlowElement, from the physical interaction library (see Subclause 11.2.2 Next snippet Each type of component has its own behaviors, defined as constraints ... Related snippets A.4.1 Introduction: This subannex gives a model of a simple hydraulic system as an example of physical interaction (fluid flow). It does not include any signal flows A.4.2 System being modeled: The hydraulic system has three components: two fluid reservoir tanks and a pipe for connecting these tanks, see Figure 58. Figure 60 shows block definitions for components of ConnectedTanks in Figure 59. Related snippets (backlinks) Each type of component has its own behaviors, defined as constraints ... Figure 59 shows the internal structure of a ConnectedTanks block. Part properties, typed by blocks ... represent components in this system. They are connected to each other through ports, which represent openings in the tanks and pipe ... Item flows on connectors indicate fluid passes through the ports and between the parts. The diagram connects a tank to each end of a pipe. SysML initial values specify property values for components used in internal block diagrams. Figure 59 shows initial values for fluid density, gravity, tank surface area, pipe radius, pipe length, and dynamic viscosity of the fluid ... An alternative for specifying initial values of part properties in the ConnectedTanks is to specialize it and redefine the part properties with default values for various configurations ... Visit also Visit also (backlinks) Flags
