Learn about Webel's comprehensive SysMLv2 Workshop Seminar course!
Webel now has a SysMLv2 Online Self-Study course with self-test Quizzes!
Learn about the Webel Q&A     online self-testing system for SysML v2/v1

The constraints for the resistor, capacitor, and inductor specify the voltage/current relationship with resistance, capacitance, and inductance, respectively.

Icon class
icon_class
fas fa-quote-left
icon_class_computed
fas fa-quote-left
Related content
BDD: Figure 40: Circuit constraint blocks
Source
SysPhS-1.1
Copyright information
About Object Management Group copyright in text extracts quoted from OMG specifications for educational purposes
Snippet kind
INFO
UML keywords
Constraint
SysML keywords
constraint parameter
ConstraintBlock
Block
Keywords
The sum of the current going through the two pins adds up to zero (one is the negative of the other), because the components do not create, destroy, or store charge.
Full quote
The constraints for the resistor, capacitor, and inductor specify the voltage/current relationship with resistance, capacitance, and inductance, respectively.
Next snippet
The source constraint defines the circuit’s electrical source. The ground constraint specifies that the voltage at the ground pin is zero.
Related snippets
Equations define mathematical relationships between the values of numeric variables. Equations in SysML, are constraints in constraint blocks that use properties of the blocks (parameters) as variables.
In this example, a constraint block BinaryElectricalComponentConstraint defines parameters and constraints common to resistors, inductors, capacitors, and sources, as shown in Figure 40.
These specify that the voltage v across the component is equal to the difference between the voltage at the positive and negative pins. The current i through the component is equal to the current going through the positive pin.
The current i through the component is equal to the current going through the positive pin.
The sum of the current going through the two pins adds up to zero (one is the negative of the other), because the components do not create, destroy, or store charge.
Related snippets (backlinks)
The source constraint defines the circuit’s electrical source. The ground constraint specifies that the voltage at the ground pin is zero.
The source constraint defines the voltage across it as a sine wave with the parameter amp as its amplitude.
Visit also
Visit also (backlinks)